The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
High level input capable with Auto Turn-On circuit
Features C.L.E.A.N. Set-up
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz.
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
1 Year Standard Warranty
CEA-2006 Compliant:
Number of Channels:
4
Rated Power
(RMS Continuous Power):
50 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power):
400 Watts
Dynamic Power
(PVC/PowerCube® Measurement):
82 Watts x 2 @ 4-Ohms 0° Res
135 Watts x 2 @ 2-Ohms 0° Res
Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Input Sensitivity:
150 mV - 12 V
Signal Input:
Hi/Low level: 2 RCA pair
Signal Output:
-
Power Input Connector:
Captive C-Clamp
Power Wire Gauge:
8 AWG to 4 AWG
Speaker Output Connector:
Captive C-Clamp
Speaker Wire Gauge:
8 AWG to 18 AWG
Heat Sink Type:
Cast aluminum
Cooling:
Convection
Remote Controls:
-
Visual Indicators:
Power/Protect/Thermal LED
Input Clip LED
Output Clip LED
Circuit Topology Class:
Class-A/B
Recommended Fuse
(not included):
60A (not included)
Shipping Weight:
10.8 Lbs. (4.89 Kg.)
Dimensions (HxWxL):
2.38 x 7.76 x 11.03 (in)
6.05 x 19.71 x 28.02 (cm)